产品描述:
日本Mitutoyo三丰高度尺
-带有绝对原点标尺570-304 570-314,量程0-600mm.最小分辨率0.01mm.
特点:
1. 内置绝对原点标尺
2. 采用编码器因此无需每次开机都设置参考点
3. 由于不会产生超速错误,有效增强了其可靠性
4. 刚性立柱结构确保实现高精度测量
5. 带有硬质合金头的划线器
6. 大型液晶显示屏
7. 带有SPC数据输出
技术参数 显示: 液晶显示
功能: 调零,ABS/INC测量模式转换,资料保持,电源开/关,英制/公制转换(仅限英制/公制型)
电池: SR44锂电池(1个)(938882)
电池寿命: 连续使用情况下约为20000小时
最大响应速度:无极限
警告: 低电压
工作温度: 0~40度
ABSOLUTE Digimatic Height Gage Series 570-with ABSOLUTE Linear Encoder.
Series570
FEATURES:
Built in ABSOLUTE linear encoderThis encoder eliminates the necessity of setting the reference point at every power-on. It has improved reliability because no over-speed error will occur.
Technical Data
Resolution: 0.01mm or .0005"/0.01mm
Display: LCD, 6-digit
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed: Un limited
Battery: SR44 (1 pc.),938882
Battery life: Approx. 20000 hours under normal use
Function
Origin setting, ABS/INC switching,
Power ON/OFF, Data hold, Data output, inch/mm conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error
Standard Scriber Provided
Metric models: Carbide-tipped scriber (07GZA000), scriber clamp (05GZA033)
Inch/Metric models: Carbide-tipped scriber
Optional Accessories
905338: SPC cable (40” / 1m)
905409: SPC cable (80” / 2m)
953638: Holding bar for test indicator (length: 50mm)
953639: Holding bar for test indicator (length: 2”)
902053: Swivel clamp used with holding bar (metric)
900322: Swivel clamp used with holding bar (inch)
品牌 | 三丰Mitutoyo | 型号 | 570-304 570-314 |
测量范围 | 0-600mm 0-24inch(m) | 误差 | 0.05mm |
显示方式 | 电子数显 | 电源电压 | SR44 1.5(V) |